Bjarkoy Bridge
Project

Bjarkoy Bridge

Location

Poland / Norway

Client

Statens Vegvesen

Consultant

Ramboll AS Norge

Contractor

Implenia / Doka

Stage

Completed

Project Description

The requirement for this project was to find a suitable durable material to be used as permanent formwork on new steel
bridge sections being assembled in Poland. EMJ were contracted to provide Permadec panels of different lengths to
accommodate the variation in shape of the bridge deck at different intervals. This involved the design and manufacture of
310 different 3B.6 panels (4.22m and 2.82m lengths). We also provided 95 skewed panels with different panel lengths
and a total area of 251.6m2.

The total m2 required for the project was 1200m2 of formwork. These were shipped from our factory in the UK in 3
separate orders to arrive on site when installation could take place. Space and storage were restrictive so the deliveries
were staggered to meet the client and contractors requirements. The bridge consisted of 3 separate sections which
were approx. 100m in length each. After preloading of our formwork they were then shipped to their final destination in
Norway by barge for final placement and completion.